See why 98% of all reviews are 5 Stars

Product worked perfectly. Shipping was super fast!

Great product. I just used it this weekend and got great results on the first try.

Novice wood worker! I built a walnut table top and used 716 for the first time. It went extremely well. I used one saturating coat followed by a 400 grit lite sand and two extremely thin coats. I learned that I need to hang the lights over the top for easier cure. I used 2 min per section. Probably took 10 min for each coat. Love the results

I originally called Pierce months ago for advice on using Clean Armor finish for a desk I was building for my wife. I originally saw CA at IWF in Atlanta and bought the grain filler and semigloss top coat. I visited another distributors web site and while helpful the video's were much too long. I find Pierce's video's more helpful and to the point with good relevant info. When I reached out to him he returned my e-mails quickly with good useful info. I recently purchased another quart of the grain filler and I wanted to try the new wipe on finish as it will apparently cure with a light application. I have not used the wipe on to extensively but am using the grain filler with great results. The first coat over red oak goes on thick and I try to remove as much excess as possible. I sand down using 120. The 2nd and 3rd coats go on much thinner with less product. I sand each with 120 or 180. After the final coat I work it down to 600 using a HF pneumatic 6 inch orbital and am very happy with the satin very flat finish with visible depth. I am currently building a walk in closet with about 200 BF of Red Oak (buy direct from Amish at less than $1 BF ) and am using the grain filler for the wear surface. It has been working well and is very tough. I still spend about 90min per shelf but is still much quicker than poly. I dont have a drum sander and am left with planer marks but these are not visible with the grain filler build up sanded to 600. All in all I am very happy with Lite & Done. The video's and e-mail response and I do believe he even called me personally have been very helpful. The shipping turn around was fast. I also intend to build a light stand for my 18" Curvo instead of buying the ceiling mount UV. I want to experiment using magnets to attach to the stand so that I can remove quickly for hand held use. Thank You Pierce. I will be a repeat customer. Phil Richter TN.

Great finish!

Have used it yet...

Good product, we used it on some wood counters and a few other kitchen related parts. Was a time saver on the knotty drawer fronts, it looked as good as the epoxy method we were using but much quicker...

Totally changed my finish routine, I've been using 716 in place of Rubio and love how fast it is

Amazing product. Ive used the716 and 705, the stuff works great !

I've used the product before it works well for all of the applications I have used it for very easy and simple product.

Love it. Works as described. I build custom furniture for customers commercially. The 36 watt UV lamp and the clean armor 757 are my go to every time. I used the 36 watt UV lamp and clean armor 757 on a customers custom live edge English Walnut bar top and counter top. This was not a small job, I was very pleased with the outcome. The best part is when you go to do the install, you can take the lamp with you and do your final finish coat right there on the job.

After using the starter kit I have ordered and received the CUVO 18' light and a quart of 750. I have a quart of matte finish and knot filler on order. I craft and sell Cribbage boards and other items on Etsy and at local venues. I have been using lacquer as my finish of choice for some time. I liked the finish, but it takes a couple of days to apply multiple coats and I have to deal with the solvent smell. The Clean Armor results in a nicer finish, no solvent small and fast turn around. I am sold.

Excellent packaging and the lamp works great.

Clean armor 716 is very easy to use and covers nicely

Simply put, amazing!