{"product_id":"2-oz-uv-cured-wood-crack-knot-filler","title":"2 oz - UV-Cured Wood Crack \u0026 Knot Filler","description":"\u003ch1 data-end=\"59\" data-start=\"0\"\u003eLite n Done UV-Cured Wood Crack \u0026amp; Knot Filler (2 fl oz) \u003c\/h1\u003e\n\u003cp data-end=\"318\" data-start=\"61\"\u003eStop fighting runny super glue, long epoxy cure times, and messy hot glue fills. Lite n Done UV-Cured Wood Crack \u0026amp; Knot Filler is a thick, non-run filler made to fill common wood defects cleanly—then cure rock-hard in seconds with a UV\/LED curing light.\u003c\/p\u003e\n\u003cp data-end=\"415\" data-start=\"320\"\u003eIt stays where you place it, builds in layers, and gets you back to sanding and finishing fast.\u003c\/p\u003e\n\u003cp data-end=\"443\" data-start=\"417\"\u003e\u003cstrong data-end=\"443\" data-start=\"417\"\u003eWhy woodworkers switch from CA Glue..\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"506\" data-start=\"445\"\u003eWon't bubble when you cure it. No toxic accelerator needed.\u003c\/p\u003e\n\u003cp data-end=\"506\" data-start=\"445\"\u003eThick viscosity formula: fills without wicking away. Consistency of thick honey.\u003c\/p\u003e\n\u003cp data-end=\"576\" data-start=\"508\"\u003eCures harder than epoxy in seconds (with light): fast repairs, less downtime\u003c\/p\u003e\n\u003cp data-end=\"641\" data-start=\"578\"\u003eWide-range UV compatibility: cures with 365–395nm UV\/LED lights\u003c\/p\u003e\n\u003cp data-end=\"715\" data-start=\"643\"\u003ePrecision application: metal needle tip for fine control and clean fills. Less waste.\u003c\/p\u003e\n\u003cp data-end=\"993\" data-start=\"840\"\u003eClog-resistant storage: each 2 oz applicator includes a metal wire stopper to clear the needle tip, keep the product fresh, and block light from entering\u003c\/p\u003e\n\u003cp data-end=\"1055\" data-start=\"995\"\u003eSandable immediately: hard, crisp fill that feathers cleanly\u003c\/p\u003e\n\u003cp data-end=\"1110\" data-start=\"1057\"\u003eNo mixing: use what you need, cap it, and keep moving\u003c\/p\u003e\n\u003cp data-end=\"1180\" data-start=\"1112\"\u003eLayer-friendly: ideal for controlled, clean builds in deeper defects\u003c\/p\u003e\n\u003cp data-end=\"1202\" data-start=\"1182\"\u003e\u003cstrong data-end=\"1202\" data-start=\"1182\"\u003eBest for filling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1230\" data-start=\"1204\"\u003eCracks, checks, and splits- Knots and sap pockets- Voids and gaps- Nail holes \/Worm holes \/ Insect holes- Chip-out and tear-out pockets (routing\/planing mishaps)- Edge voids (including plywood voids)- Open seams between boards where you need a hard, sandable fill\u003c\/p\u003e\n\u003cp data-end=\"1506\" data-start=\"1481\"\u003e\u003cstrong data-end=\"1506\" data-start=\"1481\"\u003eWhat it’s like to use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1698\" data-start=\"1508\"\u003eThis filler has a consistency similar to honey, so you can pack and shape it without it running—especially helpful on edges, vertical surfaces, and knots where thin fillers disappear.\u003c\/p\u003e\n\u003cp data-end=\"1714\" data-start=\"1700\"\u003e\u003cstrong data-end=\"1714\" data-start=\"1700\"\u003eHow to use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1774\" data-start=\"1716\"\u003ePrep: Remove dust and loose fibers. Surface should be dry.\u003c\/p\u003e\n\u003cp data-end=\"1828\" data-start=\"1776\"\u003eFill: Pack the defect slightly proud of the surface.\u003c\/p\u003e\n\u003cp data-end=\"1897\" data-start=\"1830\"\u003eCure: Expose to a UV\/LED curing light (365–395nm) until fully hard, usually 10-30 seconds or less.\u003c\/p\u003e\n\u003cp data-end=\"1945\" data-start=\"1899\"\u003eFinish: Sand flush and apply finish as normal.\u003c\/p\u003e\n\u003cp data-end=\"2025\" data-start=\"1947\"\u003eTip: For deeper voids, fill in 1\/16\" layers—cure each layer before topping off.\u003c\/p\u003e\n\u003cp data-end=\"2036\" data-start=\"2027\"\u003e\u003cstrong data-end=\"2036\" data-start=\"2027\"\u003eSpecs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"2060\" data-start=\"2038\"\u003eSize: 2 fl oz (237 mL)\u003c\/p\u003e\n\u003cp data-end=\"2060\" data-start=\"2038\"\u003eNo VOC formula\u003c\/p\u003e\n\u003cp data-end=\"2167\" data-start=\"2062\"\u003eIncludes: 1 × 2 oz applicator  bottle + metal needle applicator tip + wire stoppers\/ clog clearing \u003c\/p\u003e\n\u003cp data-end=\"2213\" data-start=\"2169\"\u003eType: UV-cured wood filler (thick viscosity)\u003c\/p\u003e\n\u003cp data-end=\"2243\" data-start=\"2215\"\u003eCure range: 365–395nm UV\/LED\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"2275\" data-start=\"2245\"\u003eFinish: Hard, sandable surface, ready for finish.\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"2275\" data-start=\"2245\"\u003eLarger sizes available. (Gallon)- Inquire\u003c\/p\u003e","brand":"Lite n Done","offers":[{"title":"Default Title","offer_id":53357691797872,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/9411\/0064\/files\/2_oz_UV_Cured_Knot_and_Crack_Filler-_Tall.webp?v=1773854517","url":"https:\/\/litendone.com\/products\/2-oz-uv-cured-wood-crack-knot-filler","provider":"Lite n Done","version":"1.0","type":"link"}